MLH Veneer Sheets | Approx. 0.46 mm, Multiple Grades

MLH Rotary-Cut Veneer Sheets

MLH veneer is a commercial group name for rotary-cut veneers produced from different Southeast Asian timbers. The material is commonly sorted into red, yellow and white color groups, allowing buyers to select a visual range that better matches their panel production requirements.

The typical thickness used for this product is approximately 0.46 mm. Because MLH is a grouped commercial name rather than one single timber species, color, grain and natural characteristics can vary between batches. A reference sample or approved quality photo should therefore be confirmed before mass production.

MLH Veneer Specification at a Glance

Request a MLH veneer quotation   Email your specification

Grade Standard

A Face

No visible color difference or other defects. Closable splits up to 15 mm are permitted.

B Face

Slight color variation may cover up to approximately one quarter of the sheet. Small pinholes are permitted, but insect tunnels are not. Closable splits are permitted.

C Face

Color variation is not restricted. Pinhole defects may occupy up to approximately one half of the sheet, and splits are permitted.

Whole Sheet

Supplied as a complete sheet. The exact visual tolerance should be confirmed against the order sample or agreed specification.

A Repaired

One to five repaired areas are permitted. Repairs should be neat and the color should remain uniform. The diameter of each repaired area must not exceed 30 cm.

B Repaired

Three to six repaired areas are permitted. Repair color should be generally consistent with the sheet. The diameter of each repaired area must not exceed 40 cm.

C Repaired

Joined pieces are permitted, provided the veneer is repaired into one complete sheet.

Thickness and Order Confirmation

The typical thickness is approximately 0.46 mm. Please confirm the required grade, color group, sheet length and width, quantity, packing method and destination port before quotation. Batch color and grade should be checked against an approved sample when consistent appearance is important.

Payment Terms

T/T and L/C are accepted. A 30% deposit is payable upon signing the contract.

Delivery Time

Shipment is arranged within 30 days after receipt of the deposit. For large-volume orders, the delivery schedule must be reconfirmed and mutually agreed.

How to Choose MLH Veneer for Your Order

Specify the red, yellow or white colour group, then select a face, whole-sheet or repaired classification. Compare the colour, pinhole and split allowances in the face grades; for repaired grades, check repair count, size and colour matching. MLH is a timber group, so approve representative batch samples rather than assuming one uniform species.

1. Define the intended face or inner-layer use and the appearance acceptance standard.

2. Select the thickness and grade, and record the allowed defects with an approved sample.

3. Confirm dimensions, tolerance, moisture target and processing requirements before pricing.

How to Request a Quotation

Please send the required grade, preferred color group, sheet length and width, thickness, order quantity, packing requirement and destination port. We will confirm the specification, packing and commercial terms according to the actual order requirement.

FAQ

What does MLH veneer mean?

MLH veneer is a commercial group name for rotary-cut veneers made from different Southeast Asian timbers. It is not limited to one single wood species.

What colors are available?

The main color groups are red, yellow and white. Natural color and grain can vary between batches, so an approved sample is recommended.

What is the typical thickness?

The typical thickness is approximately 0.46 mm. The final thickness requirement should be confirmed when placing an order.

What grades are used?

The supplied grading note defines A Face, B Face, C Face, Whole Sheet, A Repaired, B Repaired and C Repaired classifications.

What payment methods are accepted?

T/T and L/C are accepted. A 30% deposit is payable upon signing the contract.

How long is the delivery time?

Shipment is arranged within 30 days after receipt of the deposit. Large-volume orders require a separately agreed delivery schedule.

Compare Other Veneer Options

Birch uses C+ to F grades with a 0.19–0.55 mm range. MLH is a grouped timber product, typically approximately 0.46 mm. Mersawa has 0.35 mm and 0.5 mm options. Grade names from different systems should not be treated as interchangeable.

Birch veneer specifications · Mersawa veneer specifications · All veneer options · Veneer thickness selection guide

Ready to enquire? Include MLH veneer, grade, thickness, sheet length and width, quantity and destination, plus any sample or packing requirements. Send your quotation request.