Current position : HOME >> PRODUCTS >> Veneer >> birch veneer

Birch Veneer Sheets | C+ to F Grades, 0.19-0.55 mm

Product name : Birch Veneer Sheets | C+ to F Grades, 0.19-0.55 mm
Product Categories : birch veneer
Product Description : Birch veneer sheets in C+, C, D+, D, E and F grades, with confirmed thickness from 0.19 to 0.55 mm. Send size and quantity for a quotation.

Details

Birch Veneer for Plywood and Panel Production

Zhide supplies thin birch veneer sheets with a practical grade system for buyers who need clear control over surface defects, knots and holes. The confirmed thickness range is 0.19-0.55 mm, and the available quality grades are C+, C, D+, D, E and F.

Because each project has different size, packing and processing requirements, please send your required length, width, grade, thickness, quantity and destination port for confirmation and quotation.

Birch veneer sheets prepared for grade selection

Confirmed Birch Veneer Grade Standard

Grade	Confirmed Quality Standard
C+	No defects. No black spots, red streaks or cracks.
C	One to three black spots are permitted. No other defects.
D+	Three to six small holes are permitted, approximately 2-6 mm in diameter. The sheet should maintain a good overall appearance, with very few sound knots.
D	Up to six holes approximately 4-10 mm in diameter are permitted. Holes should not dominate the sheet. The overall surface should remain presentable, with a small number of sound knots.
E	Approximately 12-16 holes may be permitted, depending on hole diameter. The sheet should remain flat and presentable. Slanted fiber and a see-through mesh-like structure are not permitted.
F	Hole size and surface appearance are not restricted. The sheet must remain in one complete piece and must not be broken apart.

C grade birch veneer sheets for visual quality reference

Thickness

Confirmed range: 0.19-0.55 mm
Other order details: confirmed according to the buyer's required specification before quotation

Stack of thin birch veneer sheets showing sheet flexibility and layering

Typical Applications

Plywood face or inner-layer selection
Furniture and interior panel production
Decorative panel lamination
Other wood-based panel applications subject to technical confirmation

How to Request a Quotation

Please send the following information:

Required grade: C+, C, D+, D, E or F
Required thickness within 0.19-0.55 mm
Required sheet length and width
Order quantity
Packing requirement
Destination port

We will confirm availability, packing and commercial terms according to the actual order specification.

D plus grade birch veneer surface reference

D grade birch veneer with a natural knot reference

E grade birch veneer surface reference

FAQ

What birch veneer grades are available?

The confirmed grades are C+, C, D+, D, E and F. Each grade has a different allowance for black spots, holes, knots and overall sheet appearance.

What thickness is available?

The confirmed thickness range is 0.19-0.55 mm.

How should I select a grade?

Select the grade according to the visible surface requirement and acceptable defect level of your finished panel. Send photos or a target quality reference if you need help matching a grade.

What information is needed for a quotation?

Please provide the grade, thickness, sheet size, quantity, packing requirement and destination port. These details will be confirmed before pricing.

Update time: 2026-08-15 Print Close Return to previous page